Fast Disappearing Jobs

The Bureau of Labor Statistics says the average job in the U.S. will expand its workforce by 7% through 2026, but not all industries will be so lucky.

About 17% of the 818 occupations the Bureau of Labor Statistics tracks will actually lose more workers than they add between 2016 and 2026.

Here are some of the occupations the bureau says will experience the largest decline over the next seven years, each losing more than 20% of their workers.

  1. Locomotive firers. Median annual wage: $63,820. Projected job loss through 2026: -79%. In the next couple of years, more than three-quarters of the people who hold this title will be fired or laid off. Firers monitor tracks and train instruments checking for dragging equipment, obstacles on the tracks and other potential safety problems. Very few trains will keep them on, as a lot of their work has become automated or is now done by the locomotive engineer or conductor.
  2. Respiratory therapy technicians. Median annual wage: $51,210. Projected job loss through 2026: -56%. These healthcare workers assist respiratory therapists and physicians in caring for patients who have trouble breathing, maybe because of a chronic respiratory diseases such as asthma or emphysema.
  3. Parking enforcement workers. Median annual wage: $39,840. Projected job loss through 2026: -35%. These workers patrol an assigned an area, such as a parking lot or city street, and issue tickets or citations to cars parked illegally or cars that have overstayed their parking time limit.
  4. Word processors and typists. Median annual wage: $39,750. Projected job loss through 2026: -33%. These office workers type up letters, reports, forms or other material from rough drafts, voice recording, or other documents using either a word processor, computer or typewriter. Some may also perform other clerical duties commonly done by secretaries and other administrative assistants.
  5. Watch repairers. Median annual wage: $39,910. Projected job loss through 2026: -30%. As the name suggests, these workers repair, clean and adjust timing-keeping instruments, such as watches and clocks. The popularity of smartphones likely diminished people’s need for other time tracking devices.
  6. Motor vehicle electronic-equipment installers and repairers. Median annual wage: $35,590. Projected job loss through 2026: -26%. These workers install and repair the sound, security and navigation equipment used in vehicles. As car companies continue to roll out models with more advanced sound, security, entertainment and navigation systems, these workers receive fewer calls since these higher-quality new systems typically require less maintenance and upkeep than previous models did.
  7. Foundry mold and core makers. Median annual wage: $35,430. Projected job loss through 2026: -24%. These workers make or form wax or sand cores or molds used in the production of metal castings in foundries. The number of positions is expected to drop because of improvements to and increased usage of labor-saving machinery and the fact that any U.S. manufacturers have moved their production to foreign counties.
  8. Metal pourers and casters. Median annual wage: $37,730. Projected job loss through 2026: -23%. These workers operate hand-controlled mechanisms to pour and regulate the flow of molten metal into molds to produce castings or ingots. Technological advances in the machinery used in this process will lower demand for human workers, as will the continued competition metal manufacturing industries face from foreign companies for orders from U.S. customers.
  9. Computer operators. Median annual wage: $45,840. Projected job loss through 2026: -23%. These tech workers monitor electronic data-processing equipment, respond to operation and error messages and may enter commands at a computer terminal and set controls on computers and peripheral devices.
  10. Telephone operators. Median annual wage: $37,240. Projected job loss through 2026: -23%. These workers provide information to customers by consulting alphabetical, geographical or other directories and assist with special billing requests, such as charges to a third party and credits or refunds for incorrectly dialed numbers or bad connections. Some may also handle emergency calls or help children or people with physical disabilities make telephone calls.
  11. Mine shuttle-car operators. Median annual wage: $56,340. Projected job loss through 2026: -22%. These workers operate diesel or electric-powered shuttle cars in underground mines to transport materials from the working face of a mine to mine cars or conveyors.
  12. Data-entry keyers. Median annual wage: $32,170. Projected job loss through 2026: -21%. These workers are responsible for inputting information into electronic or digital systems using data entry devices, such as keyboards or photo composing perforators. They may also need to verify the data entered and prepare materials for printing.
  13. Postmasters and mail superintendents. Median annual wage: $75,970. Projected job loss through 2026: – 21 percent. These federal workers handle the operational and administrative services of a post office. A combination of automated sorting systems, cluster mailboxes and tight budgets will drastically reduce the number of all postal workers working by 2026, according to the bureau. Add in the fact that more people are opting for electronic bill pay and email to handle tasks that once only went through the mail and the demand for these services isn’t what it once was.
  14. Coil winders, tapers, and finishers. Median annual wage: $34,400. Projected job loss through 2026: – 21 percent. These workers assist in creating electric and electronic products such as resistors, transformers, generators and electric motors by winding the wire coils of electrical components. Improved processes, tools, and increased automation are expected to make this manufacturing sector more efficient and, thus, require fewer workers.
  15. Hand-grinding and polishing workers. Median annual wage: $29,550. Projected job loss through 2026: – 20 percent. These workers grind, sand and polish a variety of metal, wood, stone, clay, plastic or glass objects using hand tools or hand-held power tools.

Can ‘Net Zero’ Help Reinvent Cities?

“Net zero,“ which refers to buildings that produce enough energy to offset what they use, is a growing buzzword in residential and commercial construction. Net zero, sometimes called “zero energy”, helps pave the way for sustainability and savings on utility costs. Tim Weisheyer, broker-owner of Dream Builders Realty in Kissimmee, Fla., also hopes to show how net zero buildings can help recast Osceola County as a tech-forward hub. Weisheyer has been an integral part of the process of building what reportedly is the first net zero high school in the state of Florida.

In recent years, a handful of public and private net zero K-12 school projects have popped up across the country. School districts are largely using it as a way to lower utility costs and reduce operational costs. In Osceola County, city leaders want to also use its newly-built net zero school as a model for sustainability and as a teaching tool for the next generation of tech workers. That could prove beneficial to its economy, too: High-paying tech jobs have long been the silver bullet behind several leading housing markets.

Osceola County expects its population to double by 2040 and boasts a rapidly evolving economy. Tourism, including Walt Disney World Resort, and agriculture are its two main industries, but Weisheyer says the county is on the cusp of adding technology as a top-tier draw. Weisheyer, who serves on the Chamber of Commerce in his community, traveled with business leaders and lawmakers to Austin, Texas, to see how the city revitalized its economic development from a college town into a major tech hub.

From that, NeoCity was born in Osceola County to reinvent a 500-acre tract of land into a master-planned community that will serve as a tech hub for Central Florida. Weisheyer, who also serves as chairman of the Osceola County School Board, realized schools needed to part of that vision. “We need to make sure to develop education programs to develop the skilled workforce that we would need to support this,” he says.

As a byproduct of that vision, NeoCity Academy is set to open in August. The 500-student, demonstration high school has 45,000-square-feet and cost $15 million to build. As a net zero building, operational costs will remain low and unlock savings to the school district over the long term. The building was designed to use 76 percent less energy than a typical public school in the area. NeoCity Academy is dubbed as an immersive learning school that offers curriculum paths in the engineering, biomedical and cybersecurity fields.

The design of the building was well-thought-out to focus on energy efficiency, including a focus on air-tightness and the positioning of classrooms to maximize natural light and help lower utility costs. Solar panels on rooftops and walkway awnings also add electricity to its grid. LED lighting, integrated functions for water management and sensors throughout the building also help monitor indoor air quality and temperatures. The building’s energy production and usage will be displayed in real time on a building educational dashboard that can be used by teachers and students as part of the curriculum.

While not well-known, the south central Kansas town of Greensburg is an environmental survivor. The town was nearly destroyed by a tornado in 2007 but was rebuilt as one of the most eco-conscious places in the world. It was the first U.S. City to fully adopt LED street lights, and it gets 100% of its power from renewable energy.

Simple Skills Make You Likable

It only takes just one conversation to make others like you. Here are some simple ways to start crafting a “million-dollar personality” and become the most likable person in the room:

Keep eye contact. The first thing people will try to decide about you when they meet you is if they can trust you – and it’s fairly hard to like someone if you don’t trust them. Their decision is made almost entirely unconsciously, and it usually comes down to how well you can balance conveying two things: warmth and competence. One simple way to show you’re paying attention is to make eye contact and hold it. Making eye contact is also an effective way to convey competence, and studies have shown that those who do so are consistently judged as more intelligent.

Smile. Smiling is another simple and effective way to convey warmth. You also can laugh, tell jokes and use positive body language.

Show enthusiasm. Along with a smile, show some enthusiasm and energy, also known as charisma.

Put away your smartphone. “Pay attention. Look at theother person with no interruptions.

Give a firm handshake. Your handshake should be firm, but not too hard, certainly not limp and soft and with no dominance play.

Call people by name. Repeat people’s names numerous times as you speak to them. Tell someone else these people’s names, in case you do forget and need a reminder. Write names down in your phone with a short description of who they are and how you met them.

Practice your listening skills. Listen more than you speak. Don’t just hear words – actively listen. Active listening requires four steps: hearing, interpreting, evaluating and responding. Drop what you’re doing and pay attention. Paraphrase what you’ve heard and ask clarifying questions. Steering clear of quick judgment and jumping to conclusions. Give feedback to let the speaker know that you heard them.

Know how to accept a compliment. Accepting a compliment can be tricky because you don’t want to seem egotistical. Accept the compliment with confidence by using phrases like “Thanks! Hearing that feels really good” or “Thank you! What an amazing experience.”

It’s OK to stroke egos. Flattery grabs people by their ego and is extremely effective. Flattery comes with a caveat. Too much can be a huge turn off, especially if it doesn’t seem genuine.

If someone is interrupted, ask them to continue. Everyone has been that person who is telling a story, gets interrupted, and then has to awkwardly stand by, wondering if anyone was even listening. You can be that person’s liberator by saying something like, “Hey, can you please finish your story. I would like to hear the rest of it.”

Say you’re sorry. Taking accountability for your mistakes is instrumental in changing someone’s bad impression of you. But an “I’m sorry” when you’re not to blame for something can also be surprisingly helpful. Saying “I’m sorry” when someone tells you about something bad that happened to them is an effective way to show that you’re putting yourself in their shoes and showing empathy.

Practice good posture. Stand and sit up straight. Bad posture sends a message that you’re apathetic or unapproachable. If you convey negative body language, no one will get close enough to find out if you’re likable.

Enunciate at all times. Speaking loudly and clearly makes it easier for people to know what you’re saying.
Though yelling can be frightening, speaking loudly enough to be heard can make you sound smarter and more confident.

Be true to your word. Take ownership of your own mistakes, avoid deceit at all costs and be someone your coworkers can always count on to do the right thing. Ultimately this is what trust is all about. If you seem too warm,people may question your competence. If you appear too competent, people may assume you’re cold. Neither doormat nor jerk are particularly likable qualities. Simply be a person of your word.

Don’t complain. Being around negative people is draining.

Make everyone feel included. No one wants to feel left out. When you’re talking in a group, make sure everyone is involved.

End a conversation the right way. Your final words can leave a lasting impression on a person, so use them right. Send people off with a positive remark, such as “I enjoyed getting to know you,” “I hope you enjoy the rest of your day” or “I’ll remember our conversation.”

Put Your Elbow Grease to Work

We’re not talking about spring cleaning. For now forget about the floors, dust and windows. Look to the items you have neglected, maybe forever. There are places in your home could be harboring all sorts of nasty gunk and grime. They might not appear dirty, but don’t forget to clean them to keep them working properly and to keep you and your family safe.

If your broom and mop are coated in dirt, you’re ultimately only spreading it around your house when you’re trying to clean. Soak your mop in a mixture of water and bleach to kill anything that’s seeped into it. To clean your broom head, soak it in water and dish soap then wipe it down and let it dry.

Bath mats on the bathroom floor get just as dirty as your towels do. Dirt, dead skin and more end up there and accumulate, and even if your feet look clean, you can track contaminants to other parts of your house. Wash bath mats regularly and spritz them with white vinegar to clean bacteria between washes.

Gunk and buildup on your iron might make it seem like it’s time to buy a new one. But you can make it as good as new by cleaning it with a vinegar and baking soda paste.

Aside from getting tossed in carts and on conveyor belts, reusable grocery bags can get covered in gunk from your groceries, including dirt from vegetables, juice from leaky raw meat and more. Canvas bags can be washed in the washing machine, while recycled plastic bags can be washed by hand in warm soapy water and air dried.

Most people know that smartphones and tablets are magnets for germs because they touch all kinds of surfaces. There are plenty of electronic wipe products on the market because of this. But most people don’t consider items like their driver’s licence and credits cards when wiping down their personal possessions. These cards are handled by other people and set on all sorts of different surfaces. Use a towel or antibacterial wipe to clean it off and then rub an eraser along the magnetic strip to remove any grime that would make it harder to read.

Washing your sheets and pillowcases is part of your cleaning routine, but what about washing your pillows themselves? Dust mites, a major trigger of allergies and asthma, and their droppings accumulate by the millions in your pillow, as can multiple kinds of fungus, so it’s recommended to wash it in hot water. Check the tag on your pillow to find washing instructions.

Your keys can collect all sorts of germs, grease and dirt. On top of sanitizing them, make sure they’re free of rust by scrubbing them with salt and lemon juice or soaking them in water and vinegar. Toothpaste can also help make keys shiny and clean.

Small appliances are often not cleaned as regularly as they should be. While you might clean the coffee pot, what about the coffee maker itself? Bean debris and hard water deposits build up inside the machine. Run a cycle with half vinegar and half water to flush it out, and then a couple more cycles of just water to clear out the vinegar. You can do the same thing with Keurig machines.

You touch your car’s steering wheel and dashboard buttons after touching all sorts of surfaces, including gas pumps and your dirty exterior door handles, so it shouldn’t be surprising how dirty they can be. Wipe down plastic parts with disinfectant wipe and use leather cleaner for any leather surfaces.

It’s obvious when glass shower doors are grimy. But shower curtains can look deceptively clean. Although they’re constantly exposed to soap and warm water, that doesn’t mean they’re clean. In fact, they’re a breeding ground for all sorts of mold and mildew if not cleaned regularly (ideally at least once a month). You can run plastic shower curtains through the washing machine on the rinse cycle with a little white vinegar or run it through the wash cycle with detergent.

Even the sturdiest trash bag is prone to leave little bits of food and garbage lingering in your trash can that can fester and leave unpleasant smells even after you take out the trash. Small indoor trash cans can sometimes fit in your dishwasher for a thorough clean. For large indoor or outdoor garbage bins, take them outside, add some dish soap, scrub them out and spray them down with a hose.

The exhaust fans in your bathroom and kitchen get just as filthy as ceiling fan blades, but the dust and grease accumulates behind a grille or cover. Blast out dirt from the bathroom exhaust fan with a can of compressed air and wipe the exterior with a microfiber cloth. Remove and clean the mesh filters and fans in your kitchen exhaust.

Even after the rinse cycle, your dishwasher can remain dirty. Hard water deposits, soap scum and other buildup can cling onto the racks, and food can clog the drains. Scrub these places thoroughly, then run a cycle on hot with white vinegar to clean and disinfect. Remember to clean the filter.

Dust accumulates on houseplants just the same as other surfaces in your home. Brush down sleek leaves with a duster or microfiber cloth, or spritz them with water and wipe down. For textured or fuzzy leaves, you can use a toothbrush to get into the grooves.

Kitchen, bathtub and shower drains get a lot of TLC to make sure they don’t get clogged with hair, soap scum and food. But the drains in your bathroom sinks shouldn’t be neglected. Pop-up bathroom sink plugs are easy to forget to clean because you can’t see the gunk surrounding them. But before your bathroom sink gets so clogged it’s unable to drain, disconnect the stopper piece from underneath the sink to give it a good cleaning, and remove all the debris stuck in the pipe above it.

Most people know to wipe down their patio furniture before storing it away for the winter and again getting it out in time for backyard barbecues in the spring. But many people neglect their outdoor umbrellas, especially the inside. Dirt, moisture and bugs get trapped inside and can stain the fabric, allow mildew to grow and possibly even rust the metal mechanisms in the umbrella. Brush or vacuum out debris before washing the umbrella with warm water and laundry detergent. Add bleach to tackle mildew or tree sap stains.

Running over your lampshades with a duster once in a blue moon might not be enough to grab grime that has sunk into the surface. Try rolling it with a sticky lint roller, or vacuum it with an upholstery brush attachment. If your fabric lampshade is stained, soak the lampshade in warm soapy water with laundry or dishwashing detergent, then scrub it clean, rinse and dry.

So many crumbs fall into the bottom of a toaster. When these accumulate, they can start to burn, creating an unappetizing smell, or even catch fire. On top of simply dumping out the crumbs, wash out your toaster using soapy water and a washcloth, thin scrubber or toothbrush to make this small appliance as good as new.

Many people empty out their dust cup and replace or clean the filters on their vacuum regularly, but some additional steps are necessary to keep this appliance running smoothly. Wash your dust cup with warm soapy water and check your brushes, belts, and hoses to remove any built-up dirt or hair caught in them. It’s important to keep your vacuum clean, because it’s just one of the many areas of your home where dangerous bacteria might be growing.

Happy cleaning, everyone!

Inventions with Impact

In just a few millennia, mankind has moved from dark caves to spectacular cities and gained the ability, thanks to the internet, to pull up a good chunk of our species’ accumulated knowledge from the telephones in our pockets.

How we got from worshiping the moon to walking on it is the direct result of history-making inventions old and new. Here’s a look at some of the inventions that have had major impacts on humankind.

The wheel – The most amazing thing about the wheel isn’t so much its invention, but that people relied on dragging things around for so long. A 5,500-year-old Sumerian pictograph of a wheeled sledge represents the earliest evidence of humankind finally working smarter, not harder.

Steel – The key process of tempering steel was known to ancient Egyptians by about 900 BC, giving rise to the world’s first steel industry. Swords and knives were the initial bestsellers.

The compass – Twelfth-century Chinese and European mariners discovered that pieces of lodestone, a magnetic ore, tended to align with the North Star. Iron or steel needles touched by lodestones for long enough took on the same quality, and so, the compass was born.

The printing press – The printing press was the product of other inventions. Paper and movable type first appeared in China, but Germany’s Johannes Gutenberg generally is credited with inventing a machine that transferred ink-based text and images to paper some time around 1439. This drastically reduced the cost of printing books and other documents, and spurred the spread of information like no invention before.

The rocket – Rocket propulsion originated centuries before the first manned space flight. In 12th-century Asia, rockets propelled by a mixture of saltpeter, sulfur and charcoal were used for military purposes.

Guns –. Around the year 1000, after having invented gunpowder, the Chinese came up with a bamboo tube that used gunpowder to fire a spear. This is widely regarded as the first gun. Rifles, pistols, revolvers and more advanced forms of handheld weaponry came later.

The telescope – In 1609, Italian physicist and astronomer Galileo Galilei used a small, primitive telescope to observe mountains and craters on the moon. He also noted a band of light stretching across the heavens, which would later be identified as our home galaxy, the Milky Way.

The microscope – Moving from observing very large things to very tiny ones, the compound microscope was invented around 1590 by three Dutch spectacle makers: Hans Jansen, his son Zacharias Jansen and Hans Lippershey.

Refrigeration – Artificial refrigeration was first demonstrated by William Cullen at the University of Glasgow in 1748. But it was Ferdinand Carré who introduced ammonia as a vapor-compression coolant in 1859. The French inventor’s refrigeration became widely used, and vapor-compression refrigeration remains the most popular method of cooling.

The steam engine – Until the 17th century, the steam power had not been harnessed for any practical purpose. That changed in 1698, when Thomas Savery patented a steam-powered pump for sucking water out of mines. Much refinement later, this technology would power everything from locomotives to ships.

The automobile – Nicolas-Joseph Cugnot is widely credited as the inventor of the first true automobile. In 1769 the Frenchman’s enormous steam-powered vehicle, a tricycle, carried four people for 20 minutes at 3.6 km per hour.

The airplane – The Wright Flyer of 1903 was the first powered airplane to make a sustained flight under a pilot’s control. Designed and constructed by Wilbur and Orville Wright, it flew across the base of the Kill Devil Hills four times. The aircraft now is displayed in the National Air and Space Museum in Washington, D.C.

The battery – By providing the first source of continuous current, Italian Alessandro Volta’s invention of the electric battery in 1800 opened the door to many of the world-changing inventions on this list.

The telephone – After much competition and controversy, Scottish-born inventor Alexander Graham Bell was awarded a US patent for both the telephone instrument and the concept of a telephone system on March 7, 1876. His patent often is described as one of the most valuable of all time.

Vaccines – British physician Edward Jenner introduced the first vaccine in 1796, when he used the cowpox virus to inoculate human patients against smallpox. Since then, vaccination has wiped out smallpox, decimated polio and continues to help prevent other deadly diseases such as typhoid fever, cholera and tuberculosis.

Internal combustion engine – In 1859, Étienne Lenoir unveiled the first successful gasoline-powered engine in Paris. Closely modeled on a horizontal steam engine, it was expertly refined by German inventor Nikolaus Otto in 1878, and went on to become the power plant of choice for most of the world’s motorized vehicles.

The camera – Photography was born when the camera obscura was adapted to produce a permanent image. This was achieved by two Frenchmen, Joseph Nicéphore Niepce and Louis-Jacques-Mandé Daguerre, in the 1820s and 1830s.

The computer – The Analytical Engine, which was designed and partly built by English inventor Charles Babbage in the 19th century, is generally considered to have been the first computer. Its four components – the mill, the store, the reader and the printer – were precursors to the CPU, memory and storage and input and output devices of modern computers.

Television – Technical developments in Britain, Europe, the Soviet Union and the United States made TV broadcasting feasible by 1931. It was then that a team headed by Britain’s Isaac Shoenberg invented a complete and practical TV broadcast system based on the Emitron camera tube and a receiver based on a cathode-ray tube.

Motion pictures – Legendary American inventor Thomas Edison is frequently credited with inventing the motion picture in 1889, despite the fact that his motion-picture operations were run by an assistant, W.K.L. Dickson, and that several British and French inventors could also claim precedent. What can’t be debated is that the 1892 version of Edison’s Kinetograph camera used a 35-mm format that is still in use today.

Concrete – When English inventor Joseph Aspdin burned and ground together a mixture of limestone and clay in 1824, the Portland cement he created would go on to become the dominant cementing agent used in the production of concrete, which is now used to build the vast majority of modern structures.

Plastic – The first plastic, Parkesine, was developed by British inventor Alexander Parkes when he combined chloroform and castor oil. Parkes won a bronze medal for his invention at the International Exhibition of 1862 in London.

Dynamite – Alfred Nobel of Sweden invented dynamite in 1867 when, by chance, he combined nitroglycerin and a powdery compound known as kieselguhr. This produced a substance that was much safer to use and easier to handle than nitroglycerin alone.

The incandescent light bulb – Despite several competing claims, American Thomas Edison has always received most of the credit for inventing the light bulb. A bulb isn’t much good without power, and Edison also had developed a practical lighting system to illuminate “his” invention.

Radio – Guglielmo Marconi was the first inventor to develop a method for transmitting wireless telegraph signals over significant distances. Eventually, in 1901, the Italian physicist bridged the Atlantic when he transmitted the letter “s” in Morse code from Poldhu, Cornwall, to St. John’s, Newfoundland.

Antibiotics – A decade after Scottish bacteriologist Alexander Fleming noted that Penicillium notatum mold killed bacteria growing on a culture plate, British biochemist Ernst Chain and others isolated penicillin in 1938 and showed that it could fight many serious bacterial infections.

Nuclear fission – On Dec. 2, 1942, Italy’s Enrico Fermi and his team ushered in the Atomic Age by operating the world’s first self-sustaining nuclear reactor at the University of Chicago. Known as a “pile,” the device was made up of an array of uranium and graphite blocks.

Artificial satellites – The Soviet Union launched the first Earth-orbiting satellite, Sputnik 1, on Oct. 4, 1957. Circling the Earth every 96 minutes, Sputnik’s radio signal was the first to be transmitted around the world.

The Internet – In 1974, American computer scientist Vinton Cerf first described the transmission control protocol (TCP) that enables different types of machines on distant networks to route and assemble data packets. This laid the foundation for the global network that is now used by more than 3 billion people.

Mobile phones – Widely regarded as the inventor of the cellular phone, Martin Cooper is the American engineer who led the Motorola team that built the first mobile cellphone, and made the first cellphone calls, in 1972 and 1973. The result, the enormous DynaTAC phone, weighed around eight times as much as today’s smart phones.

Travels with Fido

Can’t bear the thought of boarding your four-legged family member as you head off for a road trip? With a little extra planning, Fido can road trip with you. Here’s some tips about traveling with your dog.

Before you hit the open road, first pay a visit to your veterinarian to make sure your furry friend is up to date on vaccinations and healthy enough for travel. Once he’s cleared, it’s a good idea to go on a few short practice trips before you embark on the real thing. This will give you a chance to see if your dog suffers from motion sickness or exhibits any nervous or anxious behaviors about traveling.

In the weeks leading up to the trip, take him on a few car rides to fun places like the dog park or a favorite pet supply store so he starts associating the car with something positive, says animal expert Dr. Tricia Earley. If he shows signs of nausea (drooling, excessive lip-licking, shaking, vomiting), you can offer treats containing ground ginger or a few drops of ginger extract 30 minutes before travel to help settle his stomach, adds Dr. Earley. If that doesn’t seem to do the trick, talk to your vet about a prescription anti-nausea medication.

Practice can’t prepare you for everything, so you’ll want to make sure you’ve packed accordingly. While your list will depend on your dog’s individual needs, here’s a good place to start:
Leash and collar with up-to-date ID tags
Food and water (Tip: Now is not the time to try a new food!)
Waste bags (Tip: Before the trip teach your dog to relieve himself on multiple surfaces-not just grass!)
Dog bed and blankets
Medical records and vaccination certificates
A few new toys and a couple of old favorites to keep boredom at bay
A recent photo of your dog
Flea and tick control
Treats
Collapsible bowls (Tip: Let him get used to them a week or two before you travel.)
A pet seat-belt or car seat and hammock to keep him safe and your seats protected

Rest stops are essential for a peaceful trip. Experts suggest you take a 15- to 30-minute break every four hours so your pup can do his business and stretch his legs. Dogs love routine, so the closer you can keep to your regular walking and feeding schedule, the better.

Snowflakes Marching, Polar Bears Pushing

I’m hoping that you can visualize some of the cringe-worthy comments you hear on TV these days, particularly from the meteorologists, in an amusing way.

Take, for example, the phrase “a massive winter storm is marching in”. Can you picture a bunch of snowflakes, or perhaps penguins, marching like an army toward your town?

Or try “an arctic blast is sweeping in”. Can you see a blast in the background as a huge broom sweeps everything in its path?

Perhaps you can ponder the meaning when the weather forecaster says the temperature is minus zero. How does minus zero differ from zero? Is that even possible?

How about “a massive cold front is pushing southward”. Can you picture a wall of snow being propelled forward by a group of polar bears standing on their hind feet?

And have you noticed the “nanny state” instructions from the meteorologists that have become so common of late? “You will need a warm jacket, mittens and a hat when you go out today.” “Don’t leave the house without your umbrella, heavy rain is expected”.

Then, of course, there’s the constant use of “weatherwise,” “temperaturewise” and a host of other instances of “wise” being tacked onto the ends of otherwise normal words. Why not “weatherdumb” or “Meteorologistdumb”? Or, you know, we could just, you know, sprinkle “you know” throughout our conversations. Meaningless, of course, but no more so than adding “wise.”

I leave you with a storm “rolling in”. Visualize a snowball picking up speed and size as it rolls down the hillside, or tumbleweeds rolling across the prairie.

How Months Are Named

Though the names of the months are among the first words we learn, we don’t really give much thought to those names. After all, it merely dictates when we have to do something or be somewhere.

But, the stories behind the names is interesting. The names involve rich histories of kings and emperors, with no shortage of Greek and Roman gods.

January – The month of January is named after Janus, the Roman god of gates and doorways. Janus is represented with two heads that are back to back, which signifies that he is looking back at the past for perspective, as well as forward to the future for hope. His duality perfectly coincides the end of one year and the start of the next. January is marked with renewal and fresh beginnings, which is why it’s the month of resolutions, to make positive changes for the year ahead. Oddly it’s commonly referred to as “Divorce Month,” since more people kick off divorce proceedings in January than any other month.

February – The name February is derived from the Roman period of Februa, which was a festival of purification. Also called the festival of Lupercalia, it was named after the Roman God Februus, who represented purification. In fact, William Shakespeare’s play Julius Caesar begins during Lupercalia. Mark Antony is instructed by Caesar to strike his wife Calpurnia, in the hope that she’ll be able to conceive. This festival took place on the 15th day of the month and involved some usual cleansing rituals to improve health and fertility. February is the only month to have 28 days – except during the Leap Year, when it has 29. According to an Irish tradition, a woman can ask a man to marry her on this day and have better luck of him saying yes.

March – The third month, March, was formerly the first month of the year in the Roman Calendar. It’s named after Mars, the Roman god of war, and also identified with the Greek god Ares. This month was considered the time to resume war, once the winter thawed out. As the Romans viewed war and fighting as a means to gaining lasting peace, this idea can provide an alternative perspective to the quote, “March comes in like a lion and goes out like a lamb.” Vasectomies spike by 30 percent during March Madness, the NCAA men’s basketball tournament. As vasectomy patients need to ice the area for a full day, doing so while sitting on the couch and watching the games all day makes perfect sense.

April – April is the month of Aphrodite, the Greek goddess of love and beauty. (In the Roman pantheon, she’s known as Venus.) The word April comes from the Latin word apeire, which means to open, likely in connection with flower buds opening to bloom in the spring. April is also marked by April Fools’ Day, which takes place on the first day of the month, and is celebrated by playing pranks on others. It is believed that the tradition began in the 1500s after the shift from the Julian calendar (where new year starts around the March equinox) to the Gregorian calendar (where the new year starts on January 1). Those who didn’t know about the calendar switch, and stuck to the old Julian system, were roundly mocked—and April Fool’s stuck through the years.

May – The name of the fifth month, May, is derived from the French word Mai. It is named after Maia, the goddess of spring and growth. Maia is also the daughter of Faunus, one of the oldest Roman deities and the wife of Vulcan. Also, in Greek mythology, Maia is known as the mother of Hermes. The Greeks and Romans saw Maia as a nurturer filled with warmth and plenty – kind of like May. In Japan, there is a condition known as May Sickness referred to as Gogatsu-byou. As the Japanese school year begins in April, and many changes take place at that time of the year, Gogatsu-byou is a type of depression that affects new students and employees after a few weeks of adjusting to a suddenly busier life.

June – Month six, June, is named after Juno, the Roman goddess of love and marriage, and also the de facto deity-counselor of the Roman state. (Hera is her Greek equivalent.) In Roman mythology, Juno watched over pregnant woman and children and insured safe births, which is why getting married in June is considered good luck. When looking at its goddess name origin, June is not only an ideal time for weddings, but it’s also a good month for renewing vows and conceiving children.

July – July initially was known as Quintilis, or “the fifth month,” which it was on the Julian calendar. July was named in honor of Julius Caesar after his death in 44 B.C., as he was born during this month. In fact, July is the first month of the calendar which is named after a real person. For those who live in the Northern Hemisphere, it’s the month known for its hot summer days, also known as “dog days.” July is the month to head to the beach, pool or playground, and take part in many other outdoor activities. In the United States, people revel in Independence Day celebrations on July 4, while in Canada, July 1 marks the similar Canada Day holiday. In the Southern Hemisphere, July is a month for reflection and meditation as it falls in the middle of the cold, dark winter.

August – The month of August was originally called Sextilis, from the Latin word sextus, meaning six. Its name was changed in honor of the Roman emperor Augustus, Julius Caesar’s great-nephew. Augustus was an emperor who brought peace to a very conflicted area, and inspired growth, reform and a stronger infrastructure within its cities. August is an excellent month for reorganization, improvements and development within ourselves and our own communities. It became the eighth month in 700 B.C. when January and February were moved to the beginning of the year on the Gregorian system.

September – Just like Quinitlis and Sextilis, September comes from the Latin term septem, meaning seven. September was originally the seventh month in the ancient Roman calendar – which was 10 months long – until 153 B.C. when it became the ninth month of the year. For the Romans, September was known for the celebration called Ludi Romani, which lasted several weeks and featured chariot races, gladiatorial contests and lots of feasts. In the spiritual sense, September can be thought of as the month that we celebrate our own personal victories and accomplishments.

October – October is derived from the word octo, which means eight, as it was the eighth month of the Roman calendar, and later became the tenth month with the Gregorian calendar. October is marked by many festivals taking place around the world, including Oktoberfest in Germany and the Aloha Festival in Hawaii, which is also known as the Mardi Gras of the Pacific. It’s also National Cookie Month, National Pizza Month, National Popcorn Month, National Dessert Month, National Pretzel Month, National Seafood Month, National Sausage Month and National Pasta Month.

November – November is derived from the Latin word novem, which means nine. Just like the others, its name stuck, even after January and February were added to the calendar, making November the eleventh month. In the United States, November is associated with the much-anticipated Thanksgiving holiday, which involves lots of eating, a four-day weekend, and Black Friday, the start of the Christmas holiday season and the busiest shopping day of the year.

December – December comes from the Latin word decem, meaning ten. It was the tenth month of the Julian calendar, and now the twelfth month of the Gregorian one. The Latin name is derived from Decima, the middle Goddess of the Three Fates, and the one who personifies the present. In the Northern Hemisphere, December is not only the start of winter but is also known for having the shortest day of the year with the least amount of daylight hours on December 21.

Montana Winters Not for Wimps

Yep, you’re right. The weather outside is frightful. But quit your bellyaching and consider how much worse it could be!

(This article from This Is Montana, published by the University of Montana, Missoula, spells it out.)

It seems that this year much of Montana is experiencing a tough winter, but it’s actually not. We are just getting back to winter after last year’s weird spell. Temperature readings haven’t gone wild – yet. No reporting stations have recorded 50 below or colder, and the coldest known low during January’s first week was 46 below Fahrenheit. Twenty to 30 below was more prevalent in the past.

Stories abound about conditions changing quickly and in a pronounced way. Montana holds the national record for cold with a 70-degrees-below-zero reading near Helena. And if you research the recorded low for most Montana towns on any given day from early November through March, you will see they range from minus 10 to minus 50 or colder. Archives of every Montana newspaper hold facts that give credibility to our reputation as a place where winter isn’t wimpy!

Frigid times can come slowly while at other times the transition is abrupt. Take a look back to 1989: January witnessed a disastrous weeklong warm spell that tricked some trees into believing spring had arrived. Unsuspecting vegetation prepared to show new growth until suddenly winter reclaimed its place in a matter of hours with a vengeance. Much plant life was killed. An Arctic air mass invaded the Northern Rockies bringing record cold temperatures and extreme wind chills. Ahead of the front, on Jan. 30, downslope winds gusted to 100 mph at Shelby, 102 mph at Browning and 124 mph at Choteau. Twelve empty railroad cars were blown over in Shelby. Elsewhere, roofs were ripped off houses, mobile homes torn apart and trees and power lines downed. Then on Jan. 31, temperatures plummeted. In Helena, it remained colder than minus 20 for a week, including a low of minus 33. Wind chills dropped to minus 75. At Wisdom the mercury sunk to minus 52. As the cold hit Great Falls, the temperature went from 54 degrees above zero to minus 23 (a 67-degree change) and did not rise to above minus 20 until Feb. 4. This included temperatures of minus 35 and minus 33.

Another abrupt renewal of winter occurred on Dec. 24, 1924. The temperature at Fairfield near Great Falls dropped from a balmy 63 at noon to a bone chilling minus 21 by midnight. This 84-degree difference still stands as the greatest 12-hour temperature change ever recorded in the United States. At another time, Browning witnessed a change of 100 degrees in 18 hours – a Chinook wind had warmed the January temperature to a spring-like 44 degrees. A traveling arctic invasion took the reading to 56 below zero. This is the U.S. and also world record for the greatest temperature drop in 24 hours.

Other stories of long, tough, frigid seasons abound, such as the winter of 1936. January was colder than usual. In February, the mean temperature from 111 reporting stations was 22.4 degrees colder than normal. Temperatures fell on Jan. 13 to minus 53 at Summit (west of the Continental Divide) and on the Jan. 15 to minus 57 at Cascade (southwest of Great Falls) and minus 59 at Frazer and Glasgow. While March saw an overall average temperature, the month ended with readings well below zero. On March 30, Red Lodge was at minus 20, Chessman Reservoir was at minus 28 and Summit’s low was minus 29. Winter’s grip held through early April with temperatures bottoming out at minus 28 at Chessman Reservoir on April 1. During that winter, many areas of Montana east of the mountains recorded below zero readings for 57 days straight. Ten below was considered to be a warm day, and the wind chill often exceeded minus 100.

In 1965, a Terry woman reported to the Miles City Star that it had been minus 20 at her place on Nov. 20 and minus 20 on March 20 “and darned few days did the temperature rise above 20 below in-between” – a total period of four months or 123 days. Pat Gudmundson, writing in a Miles City Star publication, related that the 1977-78 cold season started with heavy November snows and below-normal temperatures that continued through each month. A February blizzard isolated many southeastern towns when 15- to 20-foot drifts blocked roads and buried houses up to their rooftops. Snowplow crews struggled to open roads only to be hit by another storm.

To most folks who experienced it, the winter of 1919-20 was considered severe because it lasted from early October until May. But 1886-87 is thought to be the worst because of its impact on the cattle industry. This was the winter Charlie Russell so poignantly titled his sketch “Waiting for a Chinook or The Last of the 5,000 Brand,” which started his rise to fame. After an extremely dry summer and fall, grass was scarce. Arctic storms hit in November and December followed by short thaws. By January, a hard icy crust covered what little vegetation there was, making it impossible for animals to get at it. Deep snow and a fierce minus-30 to minus-40 cold returned and continued unabated until early March. It was the end of an era, 50 to 95 percent of the great cattle herds were lost, and the days of unmanaged, free-roaming grazing were over.

Words for THE Day

Valentine’s Day, the holiday for lovers young and old, is filled with flowers, candy and sometimes elaborate greeting cards. It’ also a day marked by considerable usage of specific images, words and phrases:

Adore
Ardor
Be Mine
Beau
Bouquet
Bow and Arrow
Boyfriend
Candy
Cherish
Cherub
Crush
Cupid
Darling
Dating
Enamored
Fall for
Flame
Flirt
Gifts
Girlfriend
Heart
Heartthrob
Hugs
Kiss
Like
Longing
Love
Lover
Lovesick
Romance
Romantic
Rose
Secret Admirer
Smitten
Suitor
Valentine
Woo
Yearning

Express your love in your own way on Feb. 14 and have a Happy Valentine’s Day!